Nederlands
English
Deutsch
Pricing
Shown price does not include VAT
Category
Brand
Search code
GHP2D25TR
Specifications
Shaft type
Conical 1:8 with 4 mm key
Ø Fitting edge
36,5 mm
Stroke volume / Pump group
17,9 cc (group 2)
front flange
European 4 hole
Direction
CW
Operating pressure
260 bar
Hydraulic connecting ports
Standard European port
Special edition
Reinforced shaft seal
Single-For-Between-End
Single
Extra
Datasheets
| Attachment | Size |
|---|---|
| p1.11530-001.pdf | 1.03 MB |
| Group | 2 |
| Medium | Hydraulic oil |
| Viscosity (cSt) | Allowed 6-500, recommended 10-100, start |
| Working temperature pump | -10⁰C +80⁰C |
| Pressure (continue) | 260 bar |
| Max. pressure (intermittent) | 275 bar |
| Max. peak pressure | 290 bar |
| Inlet pressure | 6 bar abs |
| RPM (maximum) | 3600 rpm |
| RPM (minimal) | 500 rpm |
| Efficiency | 93% between 1000 - 2000rpm |
| Ø Axe | 14,7 mm |
| Thread size shaft Ø | M12x1,5 |
| Shaft length (incl. fitting edge) | 40 mm |
| Ø Fitting edge | 36,5 mm |
| Ports | Standard European port |
| Thread inlet | M8 (stc Ø40 mm) |
| Thread outlet | M8 (stc Ø40 mm) |
| Ø Mounting hole flange | European 4-holes mounting |
| Material front and back cover | Cast iron |
| Material housing | Aluminium |
| Sealing | NBR |
| Material gears | Special hardened steel |
| Pump type | GHP |
| Displacement/group | 17,9 cc (group 2) |
| Direction | CW |
| Flow at 1500 rpm | 25,5 l/min |
| Shaft-type | Conical axe 1:8 with 4 mm key (T0) |
| Datasheets | See datasheet (s) for more product information (if available) |
| Remark | Reinforced shaft seal |
| Shaft load 1 (max. torq) | 200 Nm |
| Tightening torque shaft | 70±4 Nm |