Pricing
Category
Brand
Search code
ALP2D13VME1
Specifications
Shaft type
Conical 1:8 with 4 mm key
Ø Fitting edge
36,5 mm
Stroke volume / Pump group
9,6 cc (group 2)
front flange
European 4 hole
Direction
CW
Operating pressure
250 bar
Hydraulic connecting ports
Standard European port
Special edition
Pressure limiting valve in rear
Single-For-Between-End
Single
Extra
Datasheets
Attachment | Size |
---|---|
p1.10510-001.pdf | 1.5 MB |
Group | 2 |
Medium | Hydraulic oil |
Viscosity (cSt) | Allowed 6-500, recommended 10-100, start |
Working temperature pump | -10⁰C +80⁰C |
Pressure (continue) | 250 bar |
Max. pressure (intermittent) | 270 bar |
Max. peak pressure | 290 bar |
Inlet pressure | 0,7 - 3 bar |
RPM (maximum) | 3000 rpm |
RPM (minimal) | 600 rpm |
Efficiency | 93% between 1000 - 2000rpm |
Ø Axe | 14,7 mm |
Thread size shaft Ø | M12x1,5 |
Shaft length (incl. fitting edge) | 40 mm |
Ø Fitting edge | 36,5 mm |
Ports | Standard European port |
Thread inlet | M8 (stc Ø40 mm) |
Thread outlet | M8 (stc Ø40 mm) |
Ø Mounting hole flange | European 4-holes mounting |
Material front and back cover | Aluminium |
Material housing | Aluminium |
Sealing | NBR |
Material gears | Special hardened steel |
Pump type | ALP |
Displacement/group | 9,6 cc (group 2) |
Direction | CW |
Flow at 1500 rpm | 13,7 l/min |
Shaft-type | Conical axe 1:8 with 4 mm key (T0) |
Datasheets | See datasheet (s) for more product information (if available) |
Remark | Pressure limiting valve in lid |
Shaft load 1 (max. torq) | 200 Nm |
Tightening torque shaft | 50±4 Nm |
Ø Drain | External leakage 3/8"BSP |