Pricing
Category
Brand
Search code
ALM2D9FG
Specifications
Flange
European 4-hole mounting
Axle type
conical 1:8 with key
Connection
BSPP ports (GAS)
Turning direction
cw
Displacement
6.4 cm3/rev
Flow at 1500 Rpm
9.1 l/min
Extra
Build type | gear motor |
Max. torq shaft | 70±4 Nm |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2004 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 240 bar |
Max. pressure intermittent | 250 bar |
Max. peak pressure | 270 bar |
Max. revs | 4000 rpm |
Min. revs | 800 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft thread | M10x1 |
Shaft length | 35 mm |
Shaft length inc. fitting edge | 40 mm |
Height fitting edge | 5 mm |
Dia. fitting edge | 36.5 mm |
Center inlet - front | 47 mm |
Front - back excl. fitting edge | 96.5 mm |
Thread connection sunction side | G 1/2" |
Thread connection press side | G 1/2" |
Dia. mounting hole front | 8.5 mm |
Size mounting holes front | 71.5 x 96 mm |
key width | 4 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
Sound level | middle |
Shaft load 1 (Max. torq) | 200 Nm |
Flange | European 4-hole mounting |
Shaft type | conical 1:8 with key |
Connection | BSPP ports (GAS) |
Turning direction | cw |
Displacement | 6.4 cm3/rev |
Flow at 1500 Rpm | 9.1 l/min |