Gear pump ELIKA® 11,4cc - ELI-2S11.4-T0-D-N

Artikelnummer:

P9.23114

Category:

Flange:

european 4-hole

shaft-Type:

conical-shaft 1:8

Connection:

DIN

Rotation:

ccw

Displacement:

11,4 cm3/rev

Flow at 1500 Rpm:

17,1 l/min

Max. torque shaft bolt	50±4 Nm
Medium	hydraulic oil
Viscosity range (Cst)	allowed 6-500 recommended 10-100 start-up
Temperature range	-10⁰C +80⁰C
Pressure continuous	280 bar
Peak operating pressure	295 bar
Peak pressure	310 bar
Max inlet pressure	0,7 - 3 bar
Min. Revs	300 rpm
Max. revs	4000 rpm
Volume efficiency	97% between 1000 - 2000 rpm
Shaft thread	M12x1,5
Shaft length	35 mm
Shaft length inc. fitting edge	40 mm
Height fitting edge	5 mm
Dia. fitting edge	36,5 mm
Center inlet - front	51,8 mm
Front - back excl. fitting edge	103.5 mm
Thread mounting bolt sunction side	M6
Pitch bolts sunction side	40 mm
Thread mounting bolts	M6
Pitch bolts press side	35 mm
Dia. mounting holes front flange	9 mm
Pitch mounting holes front flange	71,5 mm x 96 mm
Key width	4 mm
Material front and back cover	Aluminium
Material housing	Aluminium
Material seal	NBR
Material gears	hardened steel
Sound level	low 48dBa/1500rpm & 55dBa/P1
Max. torque shaft	145 Nm
Flange	european 4-hole
shaft-Type	conical-shaft 1:8
Connection	DIN
Rotation	ccw
Displacement	11,4 cm3/rev
Flow at 1500 Rpm	17,1 l/min

Languages