Nederlands
English
Deutsch
Pricing
Shown price does not include VAT
Categorie
Merk
Zoek code
1PD25GVMDI6
Specifications
Shaft type
Tang shaft (5 mm)
Ø Fitting edge
25,4 mm
Stroke volume / Pump group
1,6 cc (group 1P)
front flange
European 4 hole
Direction
CW
Operating pressure
230 bar
Hydraulic connecting ports
Standard European port
Special edition
Pressure limiting valve in rear
Single-For-Between-End
Single
Extra
Datasheets
| Attachment | Size |
|---|---|
| p1.05505-001.pdf | 1.58 MB |
| Group | 1 |
| Medium | Hydraulic oil |
| Viscosity (cSt) | Allowed 6-500, recommended 10-100, start |
| Working temperature pump | -15⁰ - +80⁰C |
| Pressure (continue) | 230 bar |
| Max. pressure (intermittent) | 250 bar |
| Max. peak pressure | 270 bar |
| Inlet pressure | 0,7 - 3 bar |
| RPM (maximum) | 6000 rpm |
| RPM (minimal) | 4000 rpm |
| Efficiency | 93% between 1000 - 3000rpm |
| Ø Axe | 8 mm |
| Thread size shaft Ø | n.a. |
| Ø Fitting edge | 25,4 mm |
| Ports | Standard European port |
| Thread inlet | M6 (stc Ø30 mm) |
| Thread outlet | M6 (stc Ø30 mm) |
| Ø Mounting hole flange | See datasheet (if available) |
| Material front and back cover | Aluminium |
| Material housing | Aluminium |
| Sealing | NBR |
| Material gears | Special hardened steel |
| Pump type | ELIKA (low noise) |
| Displacement/group | 1,6 cc (group 1P) |
| Direction | CW |
| Flow at 1500 rpm | 2,4 l/min |
| Shaft-type | Tang shaft (5 mm) |
| Datasheets | See datasheet (s) for more product information (if available) |
| Remark | Pressure limiting valve in lid |
| Shaft load 1 (max. torq) | 21,5 Nm |
| Ø Drain | G1/4 (6 bar) internal leakage |