Pricing
Category
Brand
Search code
GHM3AR50T0EE1
Specifications
Flange
SAE B version 2-hole
Axle type
conical 1:8 with key
Connection
standard European port
Turning direction
both
Displacement
33 cm3/rev
Flow at 1500 Rpm
48 l/min
Extra
Build type | gear motor |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 270 bar |
Max. pressure intermittent | 260 bar |
Max. peak pressure | 285 bar |
Max. revs | 3300 rpm |
Min. revs | 500 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft thread | M14x1,5 |
Shaft length | 37.3 mm |
Shaft length inc. fitting edge | 47 mm |
Height fitting edge | 9.7 mm |
Dia. fitting edge | 101.6 mm |
Center inlet - front | 69.5 mm |
Front - back excl. fitting edge | 137 mm |
Thread mounting bolt sunction side | M10 |
Size bolts sunction side | 56 mm |
Thread bolt press side | M10 |
Size bolts press side | 56 mm |
Dia. mounting hole front | 14.3 mm |
Size mounting holes front | 146 mm |
Dia. drain connection | G3/8 |
key width | 4 mm |
Material front and back | cast iron |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 300 Nm |
Flange | SAE B version 2-hole |
Shaft type | conical 1:8 with key |
Connection | standard European port |
Turning direction | both |
Displacement | 33 cm3/rev |
Flow at 1500 Rpm | 48 l/min |