Pricing
SKU
P1.51511
Stock
1
Your price
€ 256,10
Categorie
Merk
Zoek code
ALM1AR6E1
Specifications
Flange
SAE AA version 2-hole
Axle type
cylindrical dia. 12,7mm with key
Connection
SAE J-475 UNF
Turning direction
both
Displacement
4.1 cm3/rev
Flow at 1500 Rpm
5.9 l/min
Extra
Build type | gear motor |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 250 bar |
Max. pressure intermittent | 240 bar |
Max. peak pressure | 270 bar |
Max. revs | 4000 rpm |
Min. revs | 700 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft diameter | 12.7 mm |
Shaft length | 21.5 mm |
Shaft length inc. fitting edge | 27 mm |
Height fitting edge | 5.5 mm |
Dia. fitting edge | 50.8 mm |
Center inlet - front | 46 mm |
Front - back excl. fitting edge | 90.5 mm |
Thread connection sunction side | 3/4-16 UNF |
Thread connection press side | 3/4-16 UNF |
Dia. mounting hole front | 10.3 mm |
Size mounting holes front | 82.55 mm |
Dia. drain connection | 1/4" BSP |
key width | 3 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 60 Nm |
Flange | SAE AA version 2-hole |
Shaft type | cylindrical dia. 12,7mm with key |
Connection | SAE J-475 UNF |
Turning direction | both |
Displacement | 4.1 cm3/rev |
Flow at 1500 Rpm | 5.9 l/min |