Nederlands
English
Deutsch
Pricing
Shown price does not include VAT
Category
Brand
Search code
ALPA2S9
Specifications
Shaft type
Conical 1:8 with 4 mm key
Ø Fitting edge
36.5 mm
Stroke volume / Pump group
6,4 cc (group 2)
front flange
European 4 hole
Direction
CCW
Operating pressure
250 bar
Hydraulic connecting ports
Standard European port
Single-For-Between-End
front pump
Extra
| Build type | front pump |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up |
| Temperature range | -15⁰C +80⁰C |
| Inlet pressure | 0,7 - 3 bar |
| Size mounting holes front | 71,5 x 96 mm |
| key width | 4 mm |
| Material front and back | aluminium |
| Material housing | aluminium |
| Material seal | rubber |
| Material gears | special hardened steel |
| Flange | european 4-hole mounting, Ø 36,5 mm |
| Shaft type | conical 1:8 with key |
| Connection | standard european port |
| Rotation | ccw |
| Displacement | 6,4 cm3/rev |
| Pressure continuous | 250 bar |
| Max. pressure intermittent | 270 bar |
| Max. peak pressure | 290 bar |
| Max. revs | 4000 rpm |
| Min. revs | 800 rpm |
| Shaft diameter | 12 mm |
| Shaft thread | M10x1 |
| Shaft length | 11,5 mm |
| Shaft length inc. fitting edge | 35 mm |
| Height fitting edge | 5,5 mm |
| Dia. fitting edge | 36,5 mm |
| Center inlet - front | 47 mm |
| Front - back excl. fitting edge | 96,5 mm |
| Thread mounting bolt sunction side | M6 |
| Size bolts sunction side | 30 mm |
| Thread connection sunction side | standard european port |
| Thread bolt press side | M6 |
| Size bolts press side | 30 mm |
| Thread connection press side | standard european port |
| Dia. mounting hole front | 8,5 mm |
| Flow at 1500 Rpm | 9,1 l/min |
| Max. torq shaft | 70 ±4 Nm |
| Volume efficiency | 95% at 1500 rpm |