Pricing
SKU
P1.34180
Stock
17
Your price
€ 289,10
Categorie
Merk
Zoek code
ALPA2D16FG
Specifications
Shaft type
Conical 1:8 with 4 mm key
Ø Fitting edge
36.5 mm
Stroke volume / Pump group
11,5 cc (group 2)
front flange
European 4 hole
Direction
CW
Operating pressure
230 bar
Hydraulic connecting ports
BSPP-ports (GAS)
Single-For-Between-End
front pump
Extra
Build type | front pump |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up |
Temperature range | -10⁰C +80⁰C |
Inlet pressure | 0,7 - 3 bar |
Size mounting holes front | 71,5x96 mm |
key width | 4 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | rubber |
Material gears | special hardened steel |
Flange | european 4-hole mounting, Ø 36,5 mm |
Shaft type | conical 1:8 with key |
Connection | BSPP ports (GAS) |
Rotation | cw |
Displacement | 11.5 cm3/rev |
Pressure continuous | 230 bar |
Max. pressure intermittent | 250 bar |
Max. peak pressure | 270 bar |
Max. revs | 4000 rpm |
Min. revs | 600 rpm |
Shaft thread | M12x1,5 |
Shaft length | 35 mm |
Shaft length inc. fitting edge | 40 mm |
Height fitting edge | 5 mm |
Dia. fitting edge | 36.5 mm |
Center inlet - front | 51 mm |
Front - back excl. fitting edge | 108 mm |
Thread connection sunction side | G1/2 |
Thread connection press side | G1/2 |
Dia. mounting hole front | 8.5 mm |
Shaft load 1 (Max. torq) | 200 Nm |
Flow at 1500 Rpm | 16.4 l/min |
Max. torq shaft | 70±4 Nm |
bearings | yes |
Volume efficiency | 93% between 1000 - 2000rpm |